Descripción Del Producto
Abrazadera de tensión para el conductor de aluminio
ESPECIFICACIÓN TÉCNICA
1. ALCANCE
Esta especificación cubre el diseño y la construcción de la tensión de las abrazaderas de tensión que se utilizarán para el fin de aluminio-conductores en los postes terminales y los postes de la sección.
Las abrazaderas son convenientes para utilizado en zona tropical, con una temperatura ambiente máxima de aproximadamente 40ºCy una temperatura de publicación anual mala de aproximadamente 28ºCcon humedad alta y la precipitación pesada.
2. ESTÁNDAR
esta especificación es hace referencia a y se conforma con los requisitos de seguir estándar:
3288:1973 de las BS - guarnición del aislador y del conductor para
Líneas eléctricas de arriba
BS 729 - Inmersión caliente galvanizada
3. SISTEMA ELÉCTRICO
Las abrazaderas serán diseñadas para el uso en una fase 3,3 alambres,33/22/11/6.6kv,50 Hz,primary distribution system with the star - point of the source - end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminum conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminum conductors:
a. 50mm2Alu. Conductor
b. 100 - 150mm2Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729